Transfer Charging Assembly Cleaning Mechanism - Canon GP605 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
4.

Transfer Charging Assembly Cleaning Mechanism

Volume 3>Chapter 6>VI.A.2. "Transfer Charging Wire Cleaning Mechanism"
1
J509A
0V
6
TSWC-HP
7
13
Separation
charging
assembly
1
J509B
TSWC-RV
4
5
13
When '1', the wire cleaner moves toward the rear.
Figure 6-312 Construction of the Cleaning Mechanism
Timing of Cleaning
1. The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch is
turned on.
2. The wire cleaning mechanism is turned on in user mode.
3. At the end of LSTR after making 2000 prints following wire cleaning.
Related Error Code
E063
(wire cleaner home position error)
6-30
COPYRIGHT © 1999 CANON INC.
When the wire cleaner is at the home position, '0'.
Wires
Wire cleaner
The cleaner does not reach the home position within a
specific period of time.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Transfer
Home position
charging
sensor (MSW6)
assembly
TSWC-FW
When '1', the wire cleaner moves toward the front.
Transfer/separation
charging wire
cleaning motor (M9)