D.
Fixing Roller Assembly
1.
Removing the Upper Fixing Roller
1) Remove the fixing assembly from the
copier.
2) Detach the cleaning belt, and clean the oil
pan.
3) Remove the two fixing heaters.
4) Remove the screw [1], and detach the
locking support plate [2] at the front.
5) Remove the screw [3], and detach the
locking support plate [4] at the rear.
6) Open the upper fixing unit [5].
COPYRIGHT © 1999 CANON INC.
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 FIXING SYSTEM
[2]
[1]
Figure 8-D501
[3]
Figure 8-D502
[5]
Figure 8-D503
[4]
8-37