Canon GP605 Service Manual page 828

CHAPTER 13 TROUBLESHOOTING
Level 3
FTMP- Use it to select stacking enhancement mode.
DWM • Select a timing at which the fixing temperature is
reduced to ensure proper stacking in the finisher.
DRUM- Use it to select drum cleaning enhancement mode.
CLN • Change the setting if faults occur in drum cleaning. A
higher setting increases performance.
• During copying, the drum is stopped for about 1 sec
after a specific number of sheets have been
processed, thereby allowing the cleaning blade to
recover its cleaning performance.
F-GD- Use it to select fixing inlet guide control mode.
CNT • If the images are uneven because of fixing or the
images are too light, select '1'.
13-236
COPYRIGHT © 1999 CANON INC.
Description
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
COPIER>OPTION
Remarks
0: no reduction in fixing
temperature
1: reduce after passing
1000 sheets or more
2: reduce after passing
1000 sheets or more in
high humidity
environment
3: reduce after passing
1000 sheets of AB
paper (default)
0: after passing 1000
single-sided copies or
500 double-sided
copies (default)
1: after passing 1000
single-sided copies or
250 double-sided copies
2: after passing 250 single-
sided copies or 250
double-sided copies
3: auto control to suit
environment; under high
humidity, same as '0';
under low humidity,
after passing 250 single-
sided copies or 500
double-sided copies
0: normal control (default)
1: for paper 350 mm or
larger, fixing inlet guide
is lowered when 1st
side is passing; for
others, same as normal
control.