Adjusting The Image Leading Edge Margin; Adjusting The Left/Right Non-Image Width - Canon GP605 Service Manual

CHAPTER 13 TROUBLESHOOTING
3

Adjusting the Image Leading Edge Margin

1) Set the image margin as specified in service mode (COPIER>ADJUST>FEED-
ADJ>REGIST).
4

Adjusting the Left/Right Non-Image Width

1) Correct the non-image width as specified in service mode (COPIER>ADJUST>ADJ-
XY>ADJ-Y).
Decrease the setting of
ADJ-Y. (A decrease of 12
decreases the non-image
width by 1 mm.)
13-12
COPYRIGHT © 1999 CANON INC.
Decrease the setting of REGIST.
(An increase of 23 increases the
margin by 1 mm.)
Leading edge of paper
Increase the setting of REGIST.
(A decrease of 23 decreases the
margin by 1 mm.)
Figure 13-A212
Image edge
Increase the setting of
ADJ-Y. (An increase of
12 increases the image
width by 1 mm.)
2.5mm±2.0
0
2
4
6
8
10
Figure 13-A213
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)