Removing The Primary; Removing The Pre-Transfer Charging Assembly - Canon GP605 Service Manual

3. Removing the Primary Charging
Assembly
1) Open the front cover.
2) Remove the inside cover (process unit).
3) Disconnect the connector [1]; while shift-
ing the charging assembly fixing plate [2]
to the left, slide out the primary charging
assembly [3].
4. Removing the Pre-Transfer
Charging Assembly
1) Open the front cover.
2) Remove the inside cover (process unit).
3) Disconnect the connector [1]; while shift-
ing the charging assembly fixing plate [2]
to the right, slide out the pre-transfer
charging assembly [3].
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[2]
Figure 6-B707
[3]
Figure 6-B708
[1]
[3]
[1]
[2]
6-57