Canon GP605 Service Manual page 559

7) Press the switch (SW2) on the controller
to start service mode.
8) Select the appropriate input method:
8.1)Input by keys on the Numeric Keypad-A1
for 'card' or 'ID' (initially, 'card').
8.2)To change from 'card' to 'ID,' perform the
following using the keys on the keypad:
To change 'ID' to 'card,' on the other hand
(requiring the Card Reader-A1), go to 8-
4).
MANAGE-CARD is indicated.
8.3)Press the '2' key, and press the ENT key.
MANAGE-ID is indicated.
8.4) To change to card input,
When MANAGE-ID is indicated, press
the '1' key, and then press the ENT key.
MANAGE-CARD will be indicated.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
SW2
LED1 LED2 LED3
SW2
SW3
LED4 LED5 LED6
JC8
JC5
JC6
JC9
CPU
IPC
J5
6 1 6 1
SW1 ON SW5 ON
Figure 11-C607
Code Input method
1
2
Table 11-C601
JA1
JB2
JA2
JB1
SW4
Card
ID
11-45