CHAPTER 13 TROUBLESHOOTING
VII . UPGRADING THE COPIER
The copier may be upgraded by either of the following two ways:
[1] Replacing the DIMM on the image processor PCB and the DIMM on the MFC PCB; or
[2] Re-writing the contents of the DIMM by downloading from the computer.
A.
Replacing the DIMM
Figure 13-701 shows where the DIMMs are mounted.
13-154
COPYRIGHT © 1999 CANON INC.
DIMM on the MFC PCB
Figure 13-701
DIMM on the image
processor PCB
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)