Canon GP605 Service Manual page 539

3. Installing the Control Card
1) Secure the control card in place to the con-
trol panel with four screws that come with
the unit.
Caution:
Secure the control card in place so that it
will not come into contact with the con-
trol panel cover when a card is inserted
through the slot.
2) Lead the grounding wire through the wire
saddle, and secure it in place with one
screw (w/ washer) that comes with the
unit.
COPYRIGHT © 1999 CANON INC. CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Screws
Control Card V
Figure 11-409
Screw (w/ washer)
Wire saddle
Grounding wire
Figure 11-410
Screws
11-25