Pre-Transfer Charging Assembly; Removing The Pre-Transfer Charging Assembly - Canon iR5000i Service Manual

Hide thumbs Also See for iR5000i:

Table of Contents

CHAPTER 4 IMAGE FORMATION SYSTEM

7.6 Pre-Transfer Charging Assembly

1) Open the front cover, and slide out the

hopper assembly.

2) Remove the mounting screw [1], and

disconnect the connector [2]; then, de-

tach the pre-transfer assembly [3].

When you have mounted the

pre-transfer charging assembly,

be sure to execute 'wire clean-

ing' in user mode. (If the sur-

face temperature of the fixing

upper roller is 100°C or lower,

you need not execute this, as the

wire will be cleaned automati-

2000 2000 2000 2000

CANON iR5000i/iR6000i REV.0 JUNE 2001

Table of Contents

Ir6000i Image reader-a1