Primary Charging Assembly - Canon GP605 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
3. Primary Charging Assembly Cleaning Mechanism
Volume 3>Chapter 6>VI.A.2. "Charging Wire Cleaning Mechanism"
J502A
1
PRWC-RV
7
PRWC-FV
8
0V
9
PRWC-HP
10
17 Wire
Figure 6-302 Construction of the Construction System
Timing of Cleaning
[1] The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch is
turned on.
[2] The wire cleaning mechanism is turned on in user mode.
[3] At the end of LSTR after making 2000 prints following wire cleaning.
Related Error Code
E060
(wire cleaner HP error)
6-18
COPYRIGHT © 1999 CANON INC.
When '1', the wire cleaner moves toward the rear.
When '1', the wire cleaner moves toward the front.
When the wire cleaner reaches
the home position, '0'.
Wire cleaner
The wire cleaner does not reach the home position within a
specific period of time.
Home position
sensor (MSW4)
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Primary charging
wire cleaning
motor (M8)

Primary charging assembly