Removing The Waste Toner Drive Assembly - Canon GP605 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
5. Removing the Waste Toner Drive
Assembly
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the drum drive assembly.
7) Remove the six screws [1], and detach the
waste toner drive assembly [2].
9-52
COPYRIGHT © 1999 CANON INC.
[1]
Figure 9-D707
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1] [2]
[1]