Carburettor Removal From The Engine; Spark Plug Cap Removal; Radiator Removal - Husqvarna CR 65 2012 Workshop Manual

1
2
Workshop Manual Ed. 09-2011
GENERAL PROCEDURES
CR 65 2012

Carburettor removal from the engine

- Loosen the tie (1) and remove the carburettor from the intake fitting.
1

Spark plug cap removal

- Take off the spark plug cap (1).
1

Radiator removal

- Remove the grids from the two radiators (1) releasing the pins from the holes
as shown in the figure.
- Before removing the radiator pipes, empty the cooling system by loosening
the screw (2) on the water pump cover.
E.10