Removal Of Engine From Motorcycle - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
3
2
1
1
4
5
GENERAL PROCEDURES

Removal of engine from motorcycle

- Remove the saddle as described in the relevant paragraph.
- Remove the side panels as described in the relevant paragraph.
- Remove the fuel tank as described in the relevant paragraph.
- Remove the exhaust system as described in the relevant paragraph.
- Remove the engine guard as outlined in the respective section.
H11301
- Loosen the two screws (1) of the intake manifold (2) by removing the throttle
body (3) from the head.
- Remove the connector (4) of the coil / Stick-Coil.
- Disconnect the connector (5) of the generator.
H11302
H11303
TC
H11305
E.23
TE - TXC
5
H11304
Workshop Manual Ed. 07-2012