Engine Removal - Husqvarna CR 125 2011 Workshop Manual

CR
H07001
WR
4
3
Workshop Manual Ed. 06-2011
GENERAL PROCEDURES
CR 125 2011 - WR 125 2011

Engine removal

- Remove the saddle as described in the relevant paragraph.
- Remove the fuel tank as described in the relevant paragraph.
- Remove the exhaust system as described in the relevant paragraph.
- Drain all coolant as described in the relevant paragraph.
- Remove secondary drive chain as described in the relevant paragraph.
- Remove rear brake pedal as described in the relevant paragraph.
- Remove carburettor as described in the relevant paragraph.
- Remove secondary drive chain as described in the relevant paragraph.
(CR)
- Release connector (1) from electronic control unit (2).
2
1
(WR)
- Disconnect the connector (3) of the voltage regulator (4) and the connector
(5) of the transducer (6).
6
5
H06770
E.20