Front Panel Operation - Menu Matrix - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Front Panel Operation
7.2 Front Panel Operation – Menu Matrix
Chapter
Menu Screen Description
Sect.
7.2 Opening Screen
7.2 Select (Main) Menu
7.2.1 Configuration
7.2.1.1 (Config:) Remote Control
7.2.1.2
(Config:) Tx:
7.2.1.3 (Config:) Rx:
7.2.1.4
(Config:) Intfc1
(Config:) Intfc1
7.2.1.4.1
(CDI-40 ASI Interface only)
(Config:) Intfc1
7.2.1.4.2
(CDI-60 HSSI Interface only)
(Config:) Intfc2
7.2.1.5
(CDI-70 Gigabit Ethernet Interface only)
7.2.1.6
(Config:) Ref
7.2.1.7 (Config:) Aux
7.2.1.8 (Config:) Alarms
7.2.2 Monitor
7.2.2.1 (Monitor:) Alarms
7.2.2.2 (Monitor:) Rx Stats
7.2.2.3 (Monitor:) Event-Log
7.2.3
Test
7.2.3.1 (Test:) Mode
7.2.3.2 (Test:) TestPatterns
7.2.3.2 Info
7.2.5 Save/Load
7.2.5.1 (Save/Load:) Save
7.2.5.2 (Save/Load:) Load
7.2.6 Utility
7.2.6.1 (Utility:) RT-Clk
7.2.6.2 (Utility:) Ref
7.2.6.3
(Utility:) ID
7.2.6.4 (Utility:) Display
7.2.6.5 (Utility:) Firmware
7.2.6.6 (Utility:) FAST
Submenu Selections
–
Select: Config; Monitor; Test; Info;
Save/Load; Util
Select: Remote; Tx; Rx: Int1; Int2; Ref, Aux,
Alarms
Select: Local; Serial; Ethernet; Ser+Eth
Select: FEC; Mod; Code; SymRate; Freq,
Pwr; Scram
Select: FEC; Dem; Code; SymRate; Freq;
Eb/No; PLL
–
Select: Tx; Rx; Config
Select: Tx; Rx; CTS/RTS
Select: Ingress; Egress; Man; Stats
–
Select: Ena/Dis; Force (1:1)
Select: Tx; Intfc1; Intfc2
Select: Alarms; Rx_Stats; Event-Log
Select: Transmit; Receive; Unit
–
Select: View; Clear-All
Select: Mode; Test Patterns
Select: Norm; IF; I/O; RF; Tx-CW; Tx-1,0
–
Select: Rem; Tx; Rx; Intfc1; Intfc2
Select: Save; Load
–
–
Select: RT-CLK; Ref; ID; Display; Firmware;
FAST
–
–
–
–
Select: Info; Select
Select: Cnfg; View
7–6
MN/CDM710.IOM
Revision 12