Rear Brake Caliper Parts Inspection; Rear Brake Disc Removal And Installation - Suzuki GSX1300BK B-King Service Manual

Rear Brake Caliper Parts Inspection

Refer to "Rear Brake Caliper Disassembly and
Assembly (Page 4C-4)".
Brake Caliper Cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake Caliper Piston
Inspect the brake caliper piston surface for any
scratches or other damage. If any damage is found,
replace the piston with a new one.
Brake Caliper Sliding Pin
Inspect the brake caliper sliding pin for wear and other
damage. If any damage is found, replace the sliding pin
with a new one.
Boot and Spacer
B823H14306006
Inspect the boots and spacer for damage and wear. If
any defects are found, replace them with new ones.
Brake Pad Spring
Inspect the brake pad springs for damage and excessive
bend. If any defects are found, replace them with new
ones.
I823H1430018-01

Rear Brake Disc Removal and Installation

Removal
I823H1430017-01
1) Remove the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation in Section
2D (Page 2D-11)".
2) Remove the rear brake disc.
I823H1430019-01
Rear Brakes: 4C-6
I823H1430020-01
I823H1430021-01
B823H14306007
I823H1430022-01