Wiring Harness Routing Diagram - Suzuki GSX1300BK B-King Service Manual

9A-5 Wiring Systems:

Wiring Harness Routing Diagram

4
"B"
1. Wiring harness protector
: Stick the wiring harness protector onto the seat rail bolt.
2. Clamp
: Bind the wiring harness, oil pressure switch lead wire and HO2 sensor lead
wire with the clamp.
3. Clamp
: Bind the wiring harness and rear brake light switch lead wire with the
clamp.
4. Clamp
: Bind the wiring harness and ISC valve lead wire with rib of the throttle body
at white taping point.
5. Wiring harness No. 2
6. Fixed clamp
5
"A"
6
2
9
"C"
6
3
6
7. Starter motor lead wire
8. Battery (–) lead wire
9. CMP sensor
"A": Set the clamp between the headlight and headlight housing.
"B": Turn the coupler side of the #1 ignition coil/plug cap to the left.
"C": Rout the CMP sensor lead wire above the wiring harness.
B823H19102005
1
7
8
I823H1910904-04