Emission Control Devices
Engine
Precautions for Emission Control Devices
Refer to "General Precautions in Section 00 (Page 00-1)".
Fuel Injection System Description
GSX1300BK motorcycles are equipped with a fuel injection system for emission level control. This fuel injection
system is precision designed, manufactured and adjusted to comply with the applicable emission limits. With varying
engine conditions, all of the fuel injection volumes are precisely controlled by the programmed injection maps in the
ECM to reduce CO, NOX and HC. Adjusting, interfering with, improper replacement, or resetting of any of the fuel
injection components may adversely affect injection performance and cause the motorcycle to exceed the exhaust
emission level limits.
1. Fuel tank
2. Fuel pump
3. Fuel mesh filter (For low pressure)
4. Fuel feed hose
Precautions
General Description
9
5
8
4
5. Fuel delivery pipe
6. Fuel pressure regulator
7. Fuel filter (For high pressure)
8. Primary fuel injector
Emission Control Devices:
1
6
7
3
"A"
"B"
"C"
9. Secondary fuel injector
"A": Before-pressurized fuel
"B": Pressurized fuel
"C": Relieved fuel
1B-1
B823H11200001
B823H11201001
I823H1120001-03