Specifications; Tightening Torque Specifications - Suzuki GSX1300BK B-King Service Manual

Frame Body Cover
Removal
Remove the frame body cover(-s) (1) (LH & RH).
"A"
"A": Hooking point

Tightening Torque Specifications

NOTE
The specified tightening torque is also described in the following.
"Frame Body Cover Construction (Page 9D-4)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".
1
I823H1160003-01

Specifications

Installation
Install the frame body cover(-s) in the reverse order of
removal.
Front Fender
Removal
Refer to "Front Fork Removal and Installation in Section
2B (Page 2B-2)".
Installation
Refer to "Front Fork Removal and Installation in Section
2B (Page 2B-2)".
Rear Fender
Removal
Refer to "Seat Lock Cable Routing Diagram (Page 9D-
1)".
Installation
Refer to "Rear Fender Construction (Page 9D-11)".
Exterior Parts: 9D-18
B823H19407001