Suzuki GSX1300BK B-King Service Manual page 317

1D-81 Engine Mechanical:
Oil Pressure Regulator
• Apply grease to the new O-ring and press in the oil
pressure regulator to the crankcase.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
CAUTION
!
Use the new O-ring to prevent oil leakage.
Oil Pan
• Install a new gasket (1).
CAUTION
!
Use the new gasket to prevent oil leakage.
• Install the oil pan and tighten the bolts diagonally.
Oil Pressure Switch
I823H1140481-01
• Apply bond to the thread part of oil pressure switch
1
I823H1140482-01
NOTE
Fit the new gasket washer to the oil pan bolt
(2).
Tightening torque
Oil pan bolt (a): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
and tighten oil pressure switch to the specified torque.
NOTE
Be careful not to apply bond to the hole of
thread end.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
Tightening torque
Oil pressure switch: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
2
(a)
I823H1140483-01
I718H1140233-01