Gearshift Linkage Inspection; Gearshift Shaft Oil Seal / Bearing Removal And Installation - Suzuki GSX1300BK B-King Service Manual

Gearshift Linkage Inspection

Refer to "Gearshift Shaft / Gearshift Cam Plate Removal
and Installation (Page 5B-16)".
Gearshift Shaft
Check the gearshift shaft for bend or wear.
Check the return spring for damage or fatigue.
If any defects are found, replace the defective part(-s).
Gearshift Shaft Oil Seal
Inspect the gearshift shaft oil seal lip for damage or
wear. If any defect is found, replace the oil seal with a
new one.
Gearshift Shaft Bearing
Inspect the gearshift shaft bearings for abnormal noise
and smooth rotation. Replace the bearing if there is
anything unusual.
Gearshift Shaft Oil Seal / Bearing Removal and
B823H15206015
Installation
Removal
1) Remove the gearshift shaft. Refer to "Gearshift Shaft
/ Gearshift Cam Plate Removal and Installation
(Page 5B-16)".
2) Remove the gearshift shaft oil seal.
I823H1520041-01
3) Remove the bearings (1) and (2) with the special
tools.
Special tool
I823H1520080-01
I823H1520081-01
Manual Transmission:
(A): 09921–20240 (Bearing remover set)
(A)
1
(A)
5B-17
B823H15206016
I823H1520082-01
I823H1520083-04
2
I823H1520056-01