Rear Brake Pedal Construction
2
1
1. Washer
Rear Brake Pedal Removal and Installation
Removal
1) Remove the master cylinder assembly. Refer to
"Rear Brake Master Cylinder Assembly Removal
and Installation (Page 4A-14)".
2) Remove the rear brake pedal as shown in the rear
brake pedal construction. Refer to "Rear Brake
Pedal Construction (Page 4A-17)".
2. Snap ring
: Apply grease.
B823H14106020
Brake Control System and Diagnosis:
: Do not reuse.
Installation
CAUTION
!
Replace the snap ring with a new one.
Install the rear brake pedal as shown in the rear brake
pedal construction. Refer to "Rear Brake Pedal
Construction (Page 4A-17)".
4A-17
B823H14106019
1
2
I823H1410050-01