Suzuki GSX1300BK B-King Service Manual page 445

1K-6 Exhaust System:
11) Remove the EXCV cables from its bracket (1).
Installation
CAUTION
!
The cable slots of EXCVA pulley must be
located adjustment position.
1) Temporarily connect the EXCV cable No. 1
(23H0CL) (1) and No. 2 (23H0OP) (2) to the EXCV
cable bracket and install them to the muffler joint.
NOTE
The EXCV cables are identified by the letters.
No. 1 cable (1) : 23H0CL
No. 2 cable (2) : 23H0OP
2) Adjust the inner cable length "a" of No. 1 cable in 43
– 44 mm (1.69 – 1.73 in) by turning the adjuster (3),
then tighten the lock-nuts (4).
3) Adjust the inner cable length "b" of the No. 2 cable in
47 – 48 mm (1.85 – 1.89 in) by turning the adjuster
(5), then tighten the lock-nuts (6).
4) Remove the EXCV cable bracket along with cables
by removing the nut (7).
" a "
1
I823H11B0046-03
5) Connect the other end of EXCV cable No. 1 (1) and
No. 2 (2) to the EXCVA pulley.
2
1
" b "
1
3
4
1
I823H11B0047-02
2
5
7
6
I823H11B0008-02
2
I823H11B0009-01