Clutch Hose Replacement; Clutch Fluid Replacement; Drive Chain Inspection And Adjustment - Suzuki GSX1300BK B-King Service Manual

Hide thumbs Also See for GSX1300BK B-King:
Table of Contents

Advertisement

0B-15 Maintenance and Lubrication:
3) Inspect the clutch hose for crack, damage or clutch
fluid leakage. If it is damaged, replace the clutch
hose with a new one.
4) After finishing the clutch hose inspection, reinstall
the removed parts.

Clutch Hose Replacement

Replace clutch hose
Every 4 years
Refer to "Clutch Hose Removal and Installation in
Section 5C (Page 5C-6)".

Clutch Fluid Replacement

Replace clutch fluid
Every 2 years
Refer to "Clutch Fluid Replacement in Section 5C
(Page 5C-5)".
Air Bleeding from Clutch Fluid Circuit
Refer to "Air Bleeding from Clutch Fluid Circuit in Section
5C (Page 5C-5)".

Drive Chain Inspection and Adjustment

Inspect drive chain
Initially at 1 000 km (600 miles, 2 months) and every
6 000 km (4 000 miles, 12 months) thereafter
Drive Chain Visual Check
1) With the transmission in neutral, support the
motorcycle using a jack and turn the rear wheel
slowly by hand.
2) Remove the engine sprocket inner cover. Refer to
"Engine Sprocket Removal and Installation in
Section 3A (Page 3A-2)".
3) Visually check the drive chain for the possible
defects listed as follows. If any defects are found, the
I823H1020062-02
drive chain must be replaced. Refer to "Drive Chain
Replacement in Section 3A (Page 3A-7)".
• Loose pins
• Damaged rollers
• Dry or rusted links
• Kinked or binding links
• Excessive wear
• Improper chain adjustment
• Missing O-ring seals
NOTE
I823H1020065-01
When replacing the drive chain, replace the
drive chain and sprockets as a set.
B823H10206015
B823H10206016
4) Inspect the sprocket cover protector (3). If any
defects are found, replace the protector.
5) Install the removed parts.
2
1
1. O-ring seal
2. Grease
B823H10206017
I649G1020032-02
3
I823H1020046-01

Advertisement

Table of Contents
loading

Table of Contents