Suzuki GSX1300BK B-King Service Manual page 601

5C-20 Clutch:
• Tighten the clutch spring set bolts (16) to the specified
torque.
Tightening torque
Clutch spring set bolt (b): 10 N·m (1.0 kgf-m, 7.0
lb-ft)
NOTE
Tighten the clutch spring set bolt diagonally.
• Apply a bond lightly to the mating surfaces at the
parting line between the upper and lower crankcase
as shown in the figure.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
16
(b)
I823H1530051-03
I823H1530052-01
• Install the gasket (17) and the dowel pins.
CAUTION
!
Use the new gasket to prevent oil leakage.
• Install the cushion (18) and clutch outer cover (19) to
the clutch cover.
• Tighten the clutch outer cover bolts (20) with the
washers (21) securely.
20
17
I823H1530053-01
18
19
I823H1530054-01
21
I823H1530055-01