Crank Balancer Disassembly And Assembly - Suzuki GSX1300BK B-King Service Manual

1D-89 Engine Mechanical:

Crank Balancer Disassembly and Assembly

Refer to"Engine Bottom Side Disassembly (Page 1D-
64)".
Refer to "Engine Bottom Side Assembly (Page 1D-72)".
NOTE
It is unnecessary to remove the engine
assembly from the frame when removing the
crank balancer. Refer to "Oil Pan / Oil Strainer
/ Oil Pressure Regulator Removal and
Installation in Section 1E (Page 1E-6)".
Disassembly
1) Remove the washers (1), bearings (2) and spacer
(3) from the crank balancer.
1
2) Remove the balancer gear (4) along with the
dampers (5) from the crank balancer.
3) Remove the dampers (5) from the balancer gear (4).
B823H11406036
1
2
3
2
I823H1140267-02
5
4
I823H1140268-02
Assembly
Assemble the crank balancer in the reverse order of
disassembly. Pay attention to the following points:
• Apply molybdenum oil solution to the dampers.
M/O: Molybdenum oil (MOLYBDENUM OIL
SOLUTION)
• Install the dampers to the balancer gear as shown in
the figure.
• Install the crank balancer to the balancer gear.
NOTE
• Align the parts "A" of the crank balancer
with between the dampers.
• Align the engraved line "B" on the crank
balancer with the punched mark "C" on the
balancer gear.
"A"
"A"
"C"
I823H1140269-03
"A"
I823H1140270-01
"B"
I823H1140271-01