Drive Mode Selector Description - Suzuki GSX1300BK B-King Service Manual

1H-2 Ignition System:
Also, when the ignition switch is turned ON, the indicator
light flashes as many as the number of IDs registered in
ECM. Thereafter, if the IDs are in agreement, the
indicator light turns on for two seconds to notify of
completion in successful communication.
If the indicator light (LED) flashes fast, it notifies of
communication error or disagreement of ID.
Flashing
2 registered
3 registered
4 registered
Approx. 1.6 sec.
NOTE
If the indicator light flashes fast, turn the
ignition switch OFF then ON to make
judgment again as there is possible
misjudgment due to environmental radio
interference.
CAUTION
!
When the battery performance is lowered in
winter (low temperature), the system may at
times makes a re-judgment at the time of
beginning the starter motor operation. In this
case, the indicator light operation starts
immediately after the starter operation.
5
5. Indicator light
Lighting
Normal
Normal
Normal
Abnormal
Fast flashing
Approx. 2.0 sec.
I705H1180006-01
I823H1180005-02

Drive Mode Selector Description

Engine power characteristics can be changed in 2
modes by operating the drive mode selector to meet
various riding conditions and rider's preference.
Operation
Drive mode is preset at A-mode when the ignition switch
and engine stop switch are turned on. Follow the
procedure below to operate drive mode selector.
1) Turn on the ignition switch and engine stop switch.
2) Push drive mode selector to change drive mode.
Push A or B to select the mode. Drive mode indicator
indicates actual drive mode.
NOTE
• Stop the motorcycle when operating drive
mode selector. Drive mode selector
operation will be cancelled when the
motorcycle is moving.
• Drive mode indicator blinks when drive
mode change operation is failed.
• Turning off the ignition switch or engine
stop switch will return the drive mode to A-
mode. Start the engine and reset the drive
mode.
Drive Mode
A-mode
A-mode provides sharp throttle response at all throttle
opening range to obtain maximum engine power.
B-mode
B-mode provides soft throttle response at all throttle
opening range by reducing engine power.
Engine power
B823H11801002
A
B
I823H1180027-01
A
B
Throttle opening
I823H1180028-03