Suzuki GSX1300BK B-King Service Manual page 447

1K-8 Exhaust System:
9) Remove the EXCV cover.
10) Remove the EXCV cables. Refer to "EXCV Cable
Removal and Installation (Page 1K-5)".
11) Remove the EXCVA (4).
4
12) Hold the pulley with an adjustable wrench, and
loosen the pulley mounting bolt (5).
CAUTION
!
• When loosening or tightening the pulley
bolt, be sure to fix the pulley with an
adjustable wrench, or EXCVA may get
damaged.
• Do not use the adjustable wrench to turn
EXCVA pulley so as not cause damage to
the internal gear of EXCVA.
13) Remove the pulley from the EXCVA body.
5
Installation
Install the EXCVA in the reverse order of removal. Pay
attention to the following points:
• Install the EXCVA pulley to the shaft.
NOTE
Align the shaft's line "A" and cable slots "B".
I823H11B0014-01
• Hold the pulley with an adjustable wrench, and then
tighten the pulley mounting bolt (1) to the specified
torque.
Tightening torque
EXCVA pulley mounting bolt (a): 5 N·m (0.5 kgf-
m, 3.5 lb-ft)
CAUTION
!
I823H11B0015-01
When loosening or tightening the pulley bolt,
be sure to fix pulley with an adjustable
wrench, or EXCVA may get damaged.
I823H11B0016-02
"B"
"A"
1
(a)
I823H11B0017-02
I823H11B0018-03