Suzuki GSX1300BK B-King Service Manual page 48

Brake Pads Check
The extent of brake pad wear can be checked by
observing the grooved limit line "A" on the pad. When the
wear exceeds the grooved limit line, replace the pads
with new ones. Refer to "Front Brake Pad Replacement
in Section 4B (Page 4B-2)" and "Rear Brake Pad
Replacement in Section 4C (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
Front and Rear Brake Hose Inspection
Inspect the brake hoses and hose joints for crack,
damage or brake oil leakage. If any defects are found,
replace the brake hose with a new one. Refer to "Front
Brake Hose Removal and Installation in Section 4A
(Page 4A-8)" and "Rear Brake Hose Removal and
Installation in Section 4A (Page 4A-8)".
"A"
I823H1420001-02
Brake Pedal Height Inspection and Adjustment
1) Inspect the brake pedal height "a" between the pedal
"A"
I823H1430001-03
2) Loosen the lock-nut (1).
3) Turn the push rod (2) until the brake pedal becomes
4) Tighten the lock-nut (1) securely.
Maintenance and Lubrication:
top face and footrest.
Adjust the brake pedal height if necessary.
Brake pedal height "a"
Standard: 55 – 65 mm (2.2 – 2.6 in)
55 – 65 mm (2.2 – 2.6 in) "a" below the top of the
footrest.
Tightening torque
Rear master cylinder rod lock-nut (a): 18 N·m (
1.8 kgf-m, 13.0 lb-ft)
2
1
(a)
0B-18
I823H1020047-01
I823H1020048-02
" a "
I823H1020037-02