Suzuki GSX1300BK B-King Service Manual page 251

1D-15 Engine Mechanical:
NOTE
• Make sure the throttle valves smoothly
open and close.
• For TP sensor setting procedure, refer to
"TP Sensor Adjustment in Section 1C
(Page 1C-4)".
• Apply thin coat of engine oil to the new O-rings (3) and
cushion seals (4).
CAUTION
!
Replace the O-rings and cushion seals with
new ones.
3
4
I823H1140025-01
3
4
I823H1140026-01
3
I823H1140027-01
• Assemble the fuel delivery pipes as shown in the
figure.
CAUTION
!
Be careful not to twist the fuel delivery pipe
T-joint when installing the fuel delivery pipes,
or joint part "E" of the fuel delivery pipe may
get damage.
• Install each fuel injector by pushing it straight to the
delivery pipe.
CAUTION
!
Never turn the injector while pushing it.
• Install the fuel delivery pipe assembly to the throttle
body.
• Tighten the fuel delivery pipe mounting screws (5) to
the specified torque.
Tightening torque
Fuel delivery pipe mounting screw (b): 3.5 N·m (
0.35 kgf-m, 2.5 lb-ft)
5
(b)
"E"
I823H1140028-01
5
(b)
I823H1140029-04