Muffler / Muffler Joint / Exhaust Pipe Removal And Installation - Suzuki GSX1300BK B-King Service Manual

1K-12 Exhaust System:
Muffler / Muffler Joint / Exhaust Pipe Removal
and Installation
Removal
1) Remove the frame cover and muffler covers. Refer
to "Exterior Parts Removal and Installation in Section
9D (Page 9D-14)".
2) Disconnect the taillight/rear turn signal light lead wire
coupler (1).
3) Remove the rear fender (2) along with the bracket
(3).
4) Loosen the muffler connecting bolt (4).
B823H11B06002
1
I823H11B0025-01
3
2
I823H11B0026-02
4
I823H11B0027-01
5) Remove the muffler assembly (5).
6) Remove the heat shield plate (6) and O-rings (7)
from the muffler.
6
7) Remove the EXCV cover.
8) Remove the EXCV cable bracket nut (8) and
disconnect the cables from the EXCV pulley (9).
9
5
I823H11B0028-02
7
I823H11B0029-02
I823H11B0030-01
8
I823H11B0031-02