Brake Caliper Inspection - Suzuki DR-Z400S 2001 Service Manual

6-44 CHASSIS
Remove the brake pads. (
Remove the brake caliper holder.
Remove the spring.
Place a rag over the brake caliper pistons to prevent them
from popping out, and then force out the pistons using com-
pressed air.
Do not use extremely high pressure to remove the brake
caliper pistons, otherwise damage to the pistons will
result.
Remove the dust seals and piston seals.
Do not reuse the dust seals and piston seals to pre-
vent fluid leakage.

BRAKE CALIPER INSPECTION

BRAKE CALIPER
Inspect each brake caliper cylinder wall for nicks, scratches or
other damage. If any damages are found, replace the brake cali-
per with a new one.
BRAKE CALIPER PISTONS
Inspect the brake caliper pistons for any scratches or other dam-
age. If any damages are found, replace the piston with a new
one.
6-42)