Suzuki GSX1300BK B-King Service Manual page 94

Item
EVAP system purge control
solenoid valve (E-33 only)
The engine can start and can run even if the signal in the table is not received from each sensor. But, the engine
running condition is not complete, providing only emergency help (by fail-safe circuit). In this case, it is necessary to
bring the motorcycle to the workshop for complete repair.
When two ignition signals or two injector signals are not received by ECM, the fail-safe circuit can not work and ignition
or injection is stopped.
Fail-Safe Mode
ECM stops controlling EVAP system purge
control solenoid valve.
Engine General Information and Diagnosis:
Starting Ability
"YES"
1A-23
Running Ability
"YES"