9D-17 Exterior Parts:
Frame Cover
Removal
1) Remove the frame cover center lid (1).
2) Disconnect the front seat lock cable (2) and rear seat
lock cable (3).
2
3) Remove the frame cover assembly (4).
"A": Hooked point
3
1
I823H1940072-04
I823H1940073-02
4
"A"
I823H1940074-03
4) Remove the front seat lock cable (2) from the frame
cover by removing the plate (5).
Installation
Install the frame cover assembly in the reverse order of
removal. Pay attention to the following point:
• Set the seat lock cables properly. Refer to "Seat Lock
Cable Routing Diagram (Page 9D-1)".
Muffler Cover
Removal
1) Remove the frame cover.
2) Remove the muffler cover (1) (center).
1
3) Remove the muffler cover(-s) (2) (LH & RH).
2
5
I823H1940075-02
I823H1940076-01
2
I823H1940077-01