License Plate Light Removal and Installation
Removal
1) Remove the rear fender cover (1).
2) Disconnect the license plate light coupler (2).
3) Remove the license plate light (3).
3
B823H19206010
1
I823H1920027-01
2
I823H1920028-01
I823H1920029-01
Installation
Install the rear license plate light in the reverse order of
removal. Pay attention to the following point:
• Tighten the rear license plate light mounting nuts (1)
to the specified torque.
Tightening torque
Rear license plate light mounting nut (a): 5 N·m (
0.5 kgf-m, 3.5 lb-ft)
License Plate Light Bulb Replacement
1) Remove the license plate light. Refer to "License
Plate Light Removal and Installation (Page 9B-12)".
2) Remove the lens by removing the screws.
3) Replace the bulb (1).
1
4) Reinstall the removed parts.
Lighting Systems:
9B-12
1
(a)
I823H1920030-02
B823H19206011
I823H1920031-01
I823H1920032-01