Crankcase Breather (Pcv) Hose / Reed Valve / Cover Removal And Installation - Suzuki GSX1300BK B-King Service Manual

Crankcase Breather (PCV) Hose / Reed Valve /
Cover Removal and Installation
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
2) Remove the PCV hose (1).
3) Remove the PCV reed valve cover (2).
2
4) Remove the PCV reed valve (3).
3
5) Remove the PCV cover (4).
B823H11206007
1
Installation
Installation is in the reverse order of removal.
Pay attention to the following points:
• Apply bond to the mating surface of the PCV cover.
I823H1120017-02
No.1207B or equivalent)
I823H1120018-01
• Fit the engine ground lead wire (1) and tighten the
bolts.
I823H1120019-01
• Install the PCV reed valve.
• Connect the PCV hose securely.
Emission Control Devices:
: Sealant 99000–31140 (SUZUKI BOND
NOTE
• Make surfaces free from moisture, oil, dust
and other foreign materials.
• Spread the sealant on surfaced thinly to
form an even layer, and assembly the
crankcases within a few minutes.
1B-13
4
I823H1120020-03
I823H1120021-02
1
I823H1120022-03