Specifications; Service Data; Tightening Torque Specifications - Suzuki GSX1300BK B-King Service Manual

Service Data

Injector + Fuel Pump + Fuel Pressure Regulator
Item
Injector resistance
Fuel pump discharge amount
Fuel pressure regulator operating
set pressure
Fuel
Item
Fuel type
Fuel tank capacity

Tightening Torque Specifications

Fastening part
Fuel pump mounting bolt
NOTE
The specified tightening torque is also described in the following.
"Fuel Tank Construction (Page 1G-8)"
"Fuel Pump Components (Page 1G-12)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".

Specifications

Specification
11 – 13
220 ml (7.4/7.7 US/lmp oz) and more/10 sec.
Approx. 300 kPa (3.0 kgf/cm
Specification
Use only unleaded gasoline of at least 90 pump octane (R/2
+ M/2).
Gasoline containing MTBE (Methyl Tertiary Butyl Ether), less
than 10% ethanol, or less than 5% methanol with
appropriate cosolvents and corrosion inhibitor is permissible.
Gasoline used should be graded 95 octane or higher. An
unleaded gasoline type is recommended.
Including 16.0 L (4.2/3.5 US/lmp gal)
reserve 16.5 L (4.4/3.6 US/lmp gal)
Tightening torque
N m
10
at 20 C (68 F)
2
, 43 psi)
kgf-m lb-ft
1.0 7.0
Fuel System: 1G-16
B823H11707001
Note
Note
E-03, 28, 33
Others
E-33
Others
B823H11707002
Note
(Page 1G-15)