Generator Removal And Installation - Suzuki GSX1300BK B-King Service Manual

1J-6 Charging System:

Generator Removal and Installation

Removal
1) Disconnect the battery (–) lead wire. Refer to
"Battery Removal and Installation (Page 1J-14)".
2) Drain engine oil. Refer to "Engine Oil and Filter
Replacement in Section 0B (Page 0B-10)".
3) Remove the engine sprocket outer cover (1).
4) Disconnect the CKP sensor coupler (2) and
generator coupler (3).
5) Remove the generator cover (4).
B823H11A06004
1
I823H11A0003-03
2
3
I823H11A0005-01
4
I823H11A0006-01
6) Remove the gasket (5) and dowel pins (6).
6
7) Hold the generator rotor with the special tool.
Special tool
(A): 09930–44530 (Rotor holder)
8) Remove the generator rotor bolt and washer.
9) Remove the generator rotor (7) with the special tool.
Special tool
(A): 09930–44530 (Rotor holder)
(B): 09930–30450 (Rotor remover bolt)
(B)
(A)
5
6
I823H11A0007-01
(A)
I823H11A0008-01
7
I823H11A0009-01