NEC Univerge SV8100 Features And Specifications Manual page 349

UNIVERGE SV8100
Program
Program Name
Number
21-10-01 Dial Block restriction Class per
Extension
90-19-01 Dial Block Release
Operation
To set Dial Block:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 600 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1.
Confirmation tone is heard.

5. Press Speaker or replace the handset to hang up.
To release Dial Block:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 600.
3. Dial the 4-digit Dial Block code.
4. Dial 0.
Confirmation tone is heard.

5. Press Speaker or replace the handset to hang up.
Code Restriction, Dial Block
Description/Comments
Assign the Code Restriction COS
(1~15) used by an extension when
the Dial Block feature is enabled. If
this data is 0, Code Restriction
COS follows Program 21-09-01.
Enter the extension number to
release from the Dial Block
Restriction. This program can be
used when a password is
forgotten by the user.
Assigned Data
1
0, 1~15
(0 = No Setting)

(default = 0)
[Release?]: Dial 1+
press Transfer
(Press Transfer to
cancel.)
Issue 7.0
Level
2 3

2 - 321