REP 1.3 Rear Cover
Parts List on PL 1.1 and PL 1.2
Removal
1.
Switch Off the Printer and disconnect the Power Cord.
2.
Remove the following covers:
a.
The Front Cover (REP 1.2).
b.
The Left and Right Side Covers Cover (REP 1.1).
3.
Release the wires from the wire guides on the Rear Cover
Wire Guides
Figure 1 Rear Cover Wires to Release
4.
Remove the Scanner Module (REP 1.10).
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
5.
(Figure
1).
June 2014
4-5
Remove the Rear Cover screws (4)
(Figure
Network
FAX
Figure 2 Rear Cover Screws and Connector Locations (Rear View 3025 BI)
2).
Data Plate Label
Screws
Repairs
REP 1.3