Variable Channel Bandwidth Operation - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Variable channel bandwidth operation

Select the Channel Bandwidth and Lower Center Frequency for the link.
The selection of Channel Bandwidth depends upon the PTP 600 frequency variant:
•
For PTP 25600, PTP 45600, PTP 54600, PTP 58600 and PTP 59600, Channel
Bandwidth may be 30, 15, 10 or 5 MHz.
•
For PTP 48600 and PTP 49600, Channel Bandwidth may be 20, 10 or 5 MHz.
The 30MHz channel widths are available where allowed by local regulations and
subject to some restrictions on channel choice.
Lite versions of the PTP 600 products do not support a Channel Bandwidths of 5 MHz.
Configuration of the variable bandwidth operation must be symmetric, that is, the
Transmit and receive channels must use identical Channel Bandwidths.
For details of the spectrum settings that are available to each frequency variant, refer
to Available spectrum settings
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 4-44.
Spectrum planning
2-5