Preparing The Pidu Plus To Lan Cable; Dressing The Pidu Plus Cables - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Preparing the PIDU Plus to LAN cable

Prepare the CAT5e cable that will connect the PIDU Plus to the network equipment.
This cable must meet the following requirements:
•
Use either foil screen (FTP) or braided screen (STP) cable.
•
Use screened RJ45 connectors with metal shells at both ends.
•
Ensure there is a continuous electrical connection between both screened
connectors.
CAUTION
The PIDU Plus is not normally connected to the network equipment until antenna
alignment is complete. See

Dressing the PIDU Plus cables

CAUTION
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The connected network equipment must feature screened RJ45
connectors and must be connected to ground, otherwise the PIDU Plus will
not be grounded.
Task 11: Connect link to the network
Do not dress the PIDU Plus cables too tightly, as this may make the
connections unreliable.
Installing the PIDU Plus
on page 6-83.
5-27