Connecting Up The Ptp-Sync Unit - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Connecting up the PTP-SYNC unit

To connect the PTP-SYNC to the PIDU Plus, ODU, GPS receiver (if fitted), and LPU (if
fitted), proceed as follows:
Procedure 5-9 Connect up PTP-SYNC
1 Disconnect the power supply from the PIDU Plus.
2
If using GPS, connect the cable from the GPS unit to the GPS/SYNC IN
port.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Installing a PTP-SYNC unit
5-39