User Guide: PTP 600 Series
Mounting the GPS receiver module on the equipment building
If mounting the GPS receiver for PTP-SYNC on the equipment building
select a position on the wall that meets the following requirements:
•
It must be below the roof height of the equipment building or below the height of
any roof-mounted equipment (such as air conditioning plant).
•
It must be below the lightning air terminals.
•
It must not project more than 600mm (24 inches) from the wall of the building.
If these requirements cannot all be met, then the module must be mounted on a metal
tower or mast.
Figure 2-16 Grounding and lightning protection for GPS receiver on building
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Mounting options for the PTP-SYNC GPS receiver
(Figure
2-16),
2-33