Viewing Spectrum Usage At The Slave - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series
Attribute
Interference
Threshold
Channel
Bandwidth (not
configurable)
Barring a channel
Channels can only be barred or unbarred from the master Spectrum Management web
page.
To bar or unbar a channel, click on the appropriate channel on the Local or Peer
channel spectrum plots on the master Spectrum Management web page
When the confirmation dialog is displayed, select OK.
The channel bar will take effect immediately and is not related to the measurement
quantization period.

Viewing spectrum usage at the slave

To view spectrum usage at the slave, proceed as follows:
Procedure 7-2 View spectrum usage at the slave
1
Log into the slave ODU for the link.
2 Select menu option System, Spectrum Management. The Spectrum
Management page is displayed
3
If necessary, update the Page Refresh Period and select Submit
configuration changes.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Spectrum Management uses the interference threshold to
perform instantaneous channel hops. If the measured
interference on a channel exceeds the specified threshold,
then i-DFS will instruct the wireless to immediately move to a
better channel. If a better channel cannot be found the PTP
600 Series will continue to use the current active channel.
(Default –85 dBm).
This shows the value of the variable channel bandwidth
selected.
(Figure
Managing spectrum
Meaning
7-9).
(Figure 7-8).
7-25