Motorola PTP 600 series User Manual page 454

Task 13: Set up SNMP agent
Attribute
Privacy Protocol
Step 3: SNMP user accounts configuration (for SNMPv3)
To configure SNMP user accounts, proceed as follows:
Procedure 6-38 Configure SNMP user accounts (for SNMPv3)
1
The Step 3: SNMP User Accounts Configuration page is displayed
6-52).
2
Update the individual user attributes
3 Select Next.
6-94
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The privacy protocol to be used to access the PTP 600 via
SNMP. This is disabled when Security Level is set to
'No Auth No Priv' or 'Auth No Priv'.
'DES' means Data Encryption Standard (DES) symmetric
encryption protocol.
'AES' means Advanced Encryption Standard (AES) cipher
algorithm.
NOTE
A user configured to use AES privacy protocol will not be
able to transmit and receive encrypted messages unless
the license key enables the AES capability.
(Table
Chapter 6 Configuration and alignment
Meaning
6-19) for up to 10 SNMP users.
phn-0896_012v000
(Figure
Jul 2010