Rttt Avoidance And Other Channel Use Restrictions; Radar Avoidance, I-Dfs And Bandwidth Operation; Channel Bandwidth Operation - Motorola PTP 300 Series User Manual

Motowi4 series

Hide thumbs Also See for PTP 300 Series:

Table of Contents

5.3.2 RTTT Avoidance and Other Channel Use Restrictions

Where regulatory restrictions apply to certain channels these channels are barred. The user should

note that the number of channels barred is dependent on the channel raster selected. For example

see the eﬀect of the UK RTTT channel restrictions in

channels that are barred. Barred channels are indicated by a "No Entry" symbol displayed on the

"Spectrum Management" web page, see

Operational Restrictions".

Figure 11 5.8 GHz UK RTTT Channel Avoidance – 15 MHz Channel Bandwidth Only

Radar avoidance at 5.8 GHz is applicable to EU operation and the requirements are currently as

deﬁned in EN 302 502 v1.1.1

Channel bandwidth of 15 MHz is supported for Only Full versions of the PTP 300 product variants.

Conﬁguration of the bandwidth operation must be symmetric, i.e. the transmit and receive chan-

nels must use identical channel bandwidths.

General Considerations

Figure

Section 8.3.9

"Spectrum Management Control - With

11, where blocks in red indicate

Table of Contents