Connecting The Odu To The E1 Or T1 Top Lpu; Installing The E1 Or T1 Drop And Ground Cables; Figure 5-22 Odu And Top Lpu Grounding For E1 Or T1; Figure 5-23 E1/T1 Port On Odu - Motorola PTP 600 series User Manual

Installing an E1 or T1 interface

Connecting the ODU to the E1 or T1 top LPU

Connect and ground the ODU and top LPU for E1 or T1 as described in
ODU to the top LPU
drop cables and LPU are shown in

Figure 5-22 ODU and top LPU grounding for E1 or T1

Ensure that the E1 or T1 drop cable is connected to the ODU E1/T1 port

Figure 5-23 E1/T1 port on ODU

NOTE
If it is necessary to disconnect the E1/T1 cable from the ODU, refer to
Disconnecting the drop cable from an ODU or LPU

Installing the E1 or T1 drop and ground cables

Install the E1 or T1 drop cable and bottom LPU as described in
cable and ground cables
5-50
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 5-19. The connections for both the PIDU and E1 or T1
Figure 5-22.
on page 5-18.
Chapter 5 Installation
Connecting the
(Figure 5-23).
on page 5-11.
Installing the drop
phn-0896_012v000
Jul 2010