Chapter 8 Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This section provides instructions for identifying and correcting faults in a PTP 600
link.
Perform the following procedures either on a newly installed link, or on an operational
link if communication is lost:
•
Test the hardware at each end of the link, as described in
on page 8-2.
•
Test the radio link, as described in
•
If an installation has been struck by lightning, see
•
If PTP-SYNC is installed but is not working correctly, see
guide
•
If an ODU has entered recovery mode, see
•
If the configuration files needs to be restored, see
on page 8-28.
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
on page 8-19.
Test radio link
on page 8-16.
Lightning strike
Using recovery mode
Restoring the configuration file
Chapter 8
Test link end hardware
on page 8-18.
PTP-SYNC fault finding
on page 8-21.
8-1
.
.
.
.