Inventory For Connectorized Bridge Installations; Table 4-2 Connectorized Ptp 600 Series Bridge Components - Motorola PTP 600 series User Manual

User Guide: PTP 600 Series

Inventory for connectorized bridge installations

A connectorized PTP 600 Series bridge installation requires all of the standard
installation components (apart from the integrated ODU). It also requires the
components listed in

Table 4-2 Connectorized PTP 600 Series bridge components

Outdoor unit (ODU) - connectorized
Antenna
RF cable
phn-0896_012v000
Jul 2010
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Table 4-2.
Item
Installation inventories
Notes
Pre-fitted with a mounting bracket and
earth bonding leads.
Two required per link.
Refer to ODU specifications
Purchase separately.
Only required for connectorized ODUs.
Refer to Antenna specifications
18.
Purchase separately.
For connecting the ODU to the antenna.
May be cable of type LMR100, LMR200,
LMR300, LMR400 or LMR600. Cable
losses are specified in Table
NOTE
A cable of a type similar to LMR400 is
a lot more difficult to handle and
route than a cable of a type similar to
LMR100.
on page 4-12.
on page 4-
4-79.
4-5